File: \Installation in English\Installation instructions\With network 
hardware lock.txt 

Installation instructions for NET licenses 

The files mentioned in these instructions, required to install our 
software, are located in the 'Installation in English' directory of 
the CYPE programs installation DVD (or the directory where the 
installation file of the 'complete version' has been extracted from 
our web-site). 

  

 1. License key installation (only if the user has received 
    installation codes) 

 If you have received a file containing key codes, save it in the root 
 directory of the 'C' drive of the PC to which the net license key 
 will be connected (it does not necessarily have to be the server).If 
 you have only received a sheet in which you can read 'License key 
 update' which displays your license number and a series of numerical 
 codes, open the 'Install Introduction of authorisation codes.exe' 
 file at the PC where the net license is going to be connected to. 
 Follow the indicated instructions and once installed, open this 
 program to introduce the codes provided. If you possess several 
 licenses, please make sure the license number of the key to be used 
 at that PC matches the number of the 'CLV' file or the user license 
 number that appears on the sheet. 

 2. User license key connection to the parallel port (only if the user 
    license key is for a parallel port) 

 If your user license key is a parallel port key, connect it to the 
 port of any net PC (if the license key codes have already been 
 installed, connect it to the machine at which these have been 
 installed). It does not necessarily have to be the server. The other 
 PCs will access this PC via the net. 

 3. USB license key (only if your license is a USB license key) 

 If your license key is a USB license key, do not connected until the 
 program indicates you may do so and move on to point 5 of these 
 instructions. You will be told later on when to carry out the 
 instructions indicated in step 4. 

 4. Network license key server installation 

 Check that the TCP/IP protocol is installed at all the PCs using the 
 program and/or have a license key connected to them. 

 Open the 'Install Server for network hardlocks.exe' file at the PC to 
 which the license key has been connected to. 

 Upon ending the previous installation, minimise (do not close) the 
 'Hardlock Server' window. 

 5. Installation of CYPEC programs 

 The installation of the complete pack or of the individual programs 
 can be carried out at any PC belonging to the network of the PC to 
 which the parallel port license key has been connected to or is going 
 to have the USB license key connect to it. 

 If you wish to install the complete pack of programs, double click on 
 the 'Install CYPE 2011 (English).exe' file. If you wish to install an 
 individual program, access the 'Install individual programs' 
 directory and double click on the installation file of the 
 corresponding program. 

 If your license contains connections to CAD programs, they may be 
 installed by accessing the 'Install connections with CAD programs' 
 directory, and then opening the installation file of the 
 corresponding connection. These connections are not jointly installed 
 with the complete pack. 

 6. USB license connection (only if the user license is a USB license 
    key) 

 If your user license is a USB license key, you may now connect it to 
 one of the network PCs: it does not necessarily have to be the server 
 (if the license codes have been installed, connect it to the PC where 
 these were installed). The other PCs will access it via the network. 
 Carry out the instructions indicated in step 4. 

  
CYPE 
